Nortel 1000 Installation And Commissioning Manual page 193

Table of Contents

Advertisement

Figure 63
Install Tool banner screen
CS 1000 Signaling Server Software Install Tool (sse-x.xx.xx)
=====================================================================
#####
#########
########`` `#############
########
#######`
#######
#######
####### #####`
`#########`
#######`
`#######
##########
##``##########
##
`########################
`#
`########################
###########################``
`````````
Please press <CR> when ready ...
########
``
`#############
######```####
######``
#####``
#####'
`###`
````####````
3
Press <CR> to perform system checks. If the system has less than 1
Gbyte of RAM, the following error message appears:
WARNING: Your system has less than 1 GB RAM.
In order to run Rls 5.0 software you must
upgrade RAM to 1 GB and repeat install.
Otherwise serious service problems are likely
Please enter:
<CR> -> <q> - Quit.
continue install.
Press <CR> to quit. Upgrade to 1 Gbyte of RAM (see Signaling
Server: Installation and Commissioning (NN43001-312)) and restart
the Signaling Server Install Tool again.
Communication Server 1000E
Installing a Signaling Server
`###
####
#### Communication Server 1000 Software
####`
#####
Copyright 2002 – 2006
#
<CR>
<a> - Accept the possible risks and
NORTEL NETWORKS
Installation and Commissioning
Page 193 of 466

Advertisement

Table of Contents
loading

This manual is also suitable for:

1000eCommunication server 1000Communication server 1000e

Table of Contents