Page 202 of 466
Installing a Signaling Server
Figure 74
Restore IP configuration
8
NN43041-310
Standard 01.11
Do one of the following:
•
If you are migrating a Leader Signaling Server (see "Signaling Server
migration" in Signaling Server: Installation and Commissioning
(NN43001-312),insert the Removable Media Device (RMD) into the
appropriate drive, and press <CR> or enter a to restore the IP
configuration data. After the restore is complete, the following system
message appears:
Done copying IP configuration to disk
The IP Telephony parameter confirmation screen appears (Figure 75
on
page
203). Go to step 12 on
October 2008
page
228.