Configuring An Ip Telephony Node - Nortel 1000 Installation And Commissioning Manual

Configuring an IP telephony node

Contents
Introduction
This section contains information on the following topics:
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Before you begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Configuring MS Internet Explorer . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Logging in to Element Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Importing preconfigured IP telephony files . . . . . . . . . . . . . . . . . . . . .
Reviewing and submitting IP telephony node configuration files . . . .
Adding a Follower Signaling Server to an IP telephony node . . . . . . .
Performing a datadump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
An IP Telephony node is defined as a collection of Signaling Servers and
Voice Gateway Media Cards. Each network node has a unique Node ID,
which is an integer value. A node has only one Leader Signaling Server. All
other Signaling Servers and Voice Gateway Media Cards are defined as
Followers. An IP Telephony node must be configured to make a CS 1000
system operational. For more information about IP Telephony nodes and their
configuration, refer to IP Line: Description, Installation, and Operation
(553-3001-365).
The IP Telephony node database files are backed up, along with the customer
database, by using the EDD command in LD 43. Refer to Software Input/
Output: Maintenance (553-3001-511) for details about this command.
Communication Server 1000E
Page 361 of 466
Installation and Commissioning
361
362
363
366
368
370
374
375