Nortel 1000 Installation And Commissioning Manual page 149

Rebooting the MGC
The MGC reboots and registers with the Call Server.
Found device : INTEL 82365SL
Engcode:NTDW60BA REL 08
ELAN mac address is:00:13:65:ff:ee:ed
TLAN mac address is:00:13:65:ff:ee:ec
RESET reason: Hard Reset.
Daughter board 1:NTDW62AA R02
Daughter board 2:NOT INS
Copyright 1984-2005
CPU: Chagall
Version: VxWorks5.5.1
Bootcode version: MGCBAA20
auto-booting...
Loading MSP from CF...1375736
Booting ARM0 (MSP) at 0x00000100 ...
Loading CSP from CF...6643712 + 5849088
Booting ARM1 (CSP) at 0x80010000 ...
Found device : INTEL 82365SL
Loading symbol table from /p/mainos.sym ...done
Loadware upgrade
If the MGC loadware is out of date (compared to the loadware on the Call
Server), an upgrade of the loadware occurs based on the Centralized Upgrade
setting defined during the software install and the values set in overlay 143.
The default values are set so that the upgrade starts automatically once
registration is achieved with the Call Server.
There are six pieces of loadware that are updated on the MGC. These updates
are downloaded from the Call Server.
Installing software on the CS 1000E
Wind River Systems, Inc.
Communication Server 1000E
00:13:65:ff:f8:fd.
VxWorks System Boot
Installation and Commissioning
Page 149 of 466