Displaying The Voice Gateway Status For All Voice Gateway Channels - Nortel 1000 Installation And Commissioning Manual
Hide thumbs
Also See for 1000:
- Description, installation and operation manual (646 pages) ,
- Features and services fundamentals (616 pages) ,
- Fundamentals (492 pages)
Table of Contents
Advertisement
Page 338 of 466
NN43041-310
Standard 01.11
Installing and configuring a Voice Gateway Media Card
Where xx.xxx.xxx.xxx is the ELAN IP address of the Voice Gateway
Media Card and the meaning of the status is:
•
Disabled – The card is configured but out-of-service.
•
Enabled – The card is configured and operational.
•
Unequipped – The card is not configured in the Call Server.
Procedure 73
Displaying the Voice Gateway status for all voice gateway channels
1
In Element Manager, select IP Network > Nodes: Servers, Media Cards
> Maintenance and Reports from the navigator.
The Node Maintenance and Reports web page opens, as shown in
Figure 143 on
page
2
Open the desired node by clicking on the + next to the Node ID.
This displays the Signaling Servers and Voice Gateway Media Cards
belonging to the node, as shown in Figure 144 on
3
Click GEN CMD for the desired Voice Gateway Media Card.
The General Commands web page opens, as shown in Figure 145.
October 2008
End of Procedure
337.
page
337.
Advertisement
Chapters
Table of Contents
