Unpacking Help Files For Virtual Terminal Emulator; Logging In To The Signaling Server - Nortel 1000 Installation And Commissioning Manual

Unpacking Help files for Virtual Terminal Emulator

Logging in to the Signaling Server

8 Click Save and Transfer to transfer the updated IP Telephony node
information to the other elements of the node. Refer to Transferring IP
Telephony files, and IP Line: Description, Installation, and Operation
(NN43001-500) for detailed instructions on transferring IP Telephony
node information.
Help files for the Virtual Terminal Emulator (VTE) component of Element
Manager are copied to the Signaling Server as compressed files during
installation of the Signaling Server software.
Unpacking the Help files is optional. However, they can be unpacked at any
time after the Signaling Server software is installed. To unpack the files, refer
to Signaling Server: Installation and Commissioning (NN43001-312).
Unpacking the Help files takes approximately 20 to 30 minutes. Nortel
recommends that you unpack the files during a service outage.
Refer to Element Manager: System Administration (NN43001-632) for more
information on Element Manager and the Virtual Terminal Emulator.
Use Procedure 46 on
Signaling Server from a maintenance terminal.
Communication Server 1000E
Installing a Signaling Server
End of Procedure
IMPORTANT!
page 236 to log in to the vxWorks
Page 235 of 466
TM
shell to access the
Installation and Commissioning