Connecting An Ir-8020M-101; Terminal Server; Contents; Introduction - Nortel 1000 Installation And Commissioning Manual

Connecting an IR-8020M-101

Terminal Server

Contents

Introduction

This section contains information on the following topics:
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Configuring a Terminal Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Telnet Terminal Server virtual management port . . . . . . . . . . . . . . . . .
Telnet CS 1000E COM port from a PC . . . . . . . . . . . . . . . . . . . . . . . .
Configuring a transparent rlogin port . . . . . . . . . . . . . . . . . . . . . . . . . .
Accessing an MRV Console Port through the on-board modem . . . . .
CS 1000E COM port types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Many third-party applications require serial port interfaces to provide a
connection to a PBX. As well, support staff traditionally use serial ports to
connect maintenance terminals and modems to a system for maintenance. As
the CS 1000E Call Server provides only two local serial ports for these
purposes, an IP-based Terminal Server is required to provide the necessary
standard serial ports for applications.
The CS 1000E system currently supports 2 terminal servers, the
IR-8020M-101 (non-ROHS) and the MRV LX8020S-102AC-R (ROHS).
This chapter contains information on connecting the IR-8020M-101. For
Communication Server 1000E
Page 251 of 466
Installation and Commissioning
251
253
256
257
258
262
263