Configuring A Card; Adding A Card To An Ip Telephony Node - Nortel 1000 Installation And Commissioning Manual

Configuring a card

Adding a card to an IP telephony node

Installing and configuring a Voice Gateway Media Card
• Procedure 74: "Displaying the status of Voice Gateway Media Card
units" on page 341
• Procedure 75: "Displaying the status of one unit on a Voice Gateway
Media Card" on
• Procedure 76: "Disabling a Voice Gateway Media Card using Element
Manager" on page 344
• Procedure 77: "Disabling a Voice Gateway Media Card unit using
Element Manager" on
• Procedure 78: "Enabling a Voice Gateway Media Card using Element
Manager" on page 346
• Procedure 79: "Enabling a Voice Gateway Media Card unit using
Element Manager" on
A Voice Gateway Media Card requires configuration of:
• the IP telephony properties defined with Element Manager (the Voice
Gateway Media Cards are assigned to an IP telephony node). See
"Configuring an IP telephony node" on
• the voice gateway channels defined on the CS 1000E. See "Configuring
voice gateway channels using Element Manager" on
The Voice Gateway Media Card is added to an IP telephony node using
Element Manager only. See Element Manager: System Administration
(NN43001-632) for details.
Procedure 67
Adding a Voice Gateway Media Card to an IP telephony node
1 Log in to Element Manager.
2 Select IP Network > Nodes: Servers, Media Cards from the navigator.
The Node Configuration web page opens, as shown in Figure 127.
Communication Server 1000E
page 344
page 345
page 347
Page 319 of 466
page 361.
page 323.
Installation and Commissioning