Nortel 1000 Installation And Commissioning Manual page 231

Procedure 45
Adding a Follower Signaling Server to an IP Telephony node
Note: The first time the Follower Signaling Server is installed, it cannot
obtain the system login and password, and does not have the current
CONFIG.INI file with the Call Server IP address, therefore the FTP fails.
In subsequent Follower installations, FTP succeeds.
1 Open the Web browser.
2 Enter the Signaling Server Node IP address in the Address Bar of the
browser window and press Enter on the keyboard.
Note: The ELAN network interface IP address can be required, instead
of the Node IP address, to access the Element Manager login Web page
in secure environments.
3 The Element Manager Login Web page opens.
a. Enter a valid User ID and Password combination.
— A valid User Id and Password combination is one that is defined
on the Call Server.
The IP Address of the Call Server appears in the Call Server IP
Address field.
b. Click Login.
The System Overview Web page appears.
4 Select IP Network > Nodes: Servers, Media Cards from the navigator.
The Node Configuration web page opens, as shown in Figure 108.
Communication Server 1000E
Installing a Signaling Server
Installation and Commissioning
Page 231 of 466