Configuring Tone Detectors; Logging In To Element Manager - Nortel 1000 Installation And Commissioning Manual

Configuring Tone Detectors

LD 97 - Configure Tone Detectors
Prompt
REQ
TYPE
...
MFLT0
MFLT1

Logging in to Element Manager

Configuring the CS 1000E CP PM Call Server
Tone Detectors, when required, are configured in a manner similar to that for
Digitone Receivers. The SSC card in the MG 1000E provides four units of
Multifrequency Senders and Receivers. These units are configured on card 15
of the MG 1000E. In addition Multifrequency Transmit Level codes (MFTL0
and MFTL1) must be configured in LD 97.
Response Comment
CHG Change existing data
SYSP System Parameters for Peripheral equipment)
(0)-15 Multifrequency transmit level code for Identifier 0 for
MG 1000E
(0)-15 Multifrequency transmit level code for Identifier 1 for
MG 1000E
To log in to Element Manager, follow the steps in Procedure 35 on
Element Manager supports Microsoft
Windows operating systems.
Before following this procedure, see Signaling Server: Installation and
Commissioning (NN43001-312) for information about setting up a browser
for optimal performance of Element Manager.
Communication Server 1000E
TM
Internet Explorer 6.0.2600 for
Installation and Commissioning
Page 165 of 466
page 166.