Nortel 1000 Installation And Commissioning Manual page 324

Page 324 of 466
NN43041-310 Standard 01.11
Installing and configuring a Voice Gateway Media Card
The Add VGW channels web page opens, as shown in Figure 131.
Figure 131
Add VGW channels
5 Enter the appropriate parameters to configure the VGW channels.
The TN is the logical TN of the first Voice Gateway Media Card unit.
Note: The Media Card has 8 or 32 channels. The ITG-P card has 24
channels.
6 Click Submit.
The VGW channels for this card are displayed. See Figure 132 on
page 325.
Note: If you receive an error that a pad category table does not exist for
this customer, go back to your DTI configuration step, (see "Basic system
telephony configuration" on
Block (DDB), and then perform this procedure again.
October 2008
page 457) and create a default DTI Data