Nortel 1000 Installation And Commissioning Manual page 380

Page 380 of 466
NN43041-310 Standard 01.11
Installing Line cards and cross-connecting telephones
Before you proceed, install the cable from the slot that contains the Line card
associated with the telephone being connected. Refer to "Installing the Main
Distribution Frame" on
DANGER OF ELECTRIC SHOCK
Always use caution when installing or modifying
telephone lines. Do not install telephone wiring during a
lightning storm. Do not install telephone jacks in wet
locations unless the jacks are designed for wet locations.
Never touch uninsulated telephone wiring unless the line
is disconnected at the network interface.
Refer to the Circuit Card: Description and Installation (NN43001-311) for
full descriptions of country-specific IPE cards and their installation
procedures
Figure 167 and Figure 168 on
the Media Gateway and Media Gateway Expander. Refer to these figures to
make sure that you have all circuit cards inserted in the correct slots.
October 2008
page 349, if you require additional cable installation.
page 381 show the circuit card assignments for