Nortel 1000 Installation And Commissioning Manual page 207

Figure 80
Network Routing Service (NRS) — stand-alone Signaling Server
CS 1000 Signaling Server Software Install Tool (sse-x.xx.xx)
=====================================================================
Please select the Network Routing Service (NRS) configuration for this
Signaling Server.
Please enter:
<CR> -> <a> - H.323 Gatekeeper and SIP Redirect/Proxy Server.
<b> - H.323 Gatekeeper only.
<c> - SIP Redirect/Proxy Server only.
Enter Choice>
12 Select the Network Routing Service (NRS) to be provided by this
Signaling Server. See Figure 79 on
Server or Figure 80 on
• Enter d if this Signaling Server is configured as a Coresident Leader
and is not providing an NRS. Go to step 13.
• Press <CR> or enter a if this Signaling Server is to provide an H.323
Gatekeeper and a SIP Redirect/Proxy Server.
• Enter b if this Signaling Server is to provide only an H.323
Gatekeeper.
• Enter c if this Signaling Server is to provide only a SIP Redirect/Proxy
Server.Refer to Network Routing Service Installation and
Commissioning (NN43001-564) for more information on the NRS.
Depending on the application configuration selected, either the NRS type:
Coresident Signaling Server screen or the NRS type: Standalone Signaling
Server screen appears.
Communication Server 1000E
Installing a Signaling Server
page 206
page 207 for a stand-alone Signaling Server.
Installation and Commissioning
Page 207 of 466
for a co-resident Signaling