Connecting An Mrv Lx8020S-102Ac-R Terminal; Server; Contents; Introduction - Nortel 1000 Installation And Commissioning Manual

Connecting an MRV LX8020S-102AC-R
Terminal Server

Contents

Introduction

This section contains information on the following topics:
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Configuring a Terminal Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Telnet Terminal Server virtual management port . . . . . . . . . . . . . . . . .
Telnet to CS 1000E COM port from a PC . . . . . . . . . . . . . . . . . . . . . .
Configuring an rlogin port for various applications . . . . . . . . . . . . . . .
Accessing an MRV Console Port through the on-board modem . . . . .
CS 1000E COM port types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Many third-party applications require serial port interfaces to provide a
connection to a PBX. As well, support staff traditionally use serial ports to
connect maintenance terminals and modems to a system for maintenance. As
the CS 1000E Call Server provides only two local serial ports for these
purposes, an IP-based Terminal Server is required to provide the necessary
standard serial ports for applications.
The CS 1000E system currently supports two Terminal Servers, the
MRV LX8020S-102AC-R (ROHS) and the IR-8020M-101 (non-ROHS).
This chapter contains information on connecting the LX8020S-102AC-R.
Communication Server 1000E
Page 265 of 466
Installation and Commissioning
265
268
271
271
273
276
277