Configure Ip Address For The Terminal Server - Nortel 1000 Installation And Commissioning Manual
Hide thumbs
Also See for 1000:
- Description, installation and operation manual (646 pages) ,
- Features and services fundamentals (616 pages) ,
- Fundamentals (492 pages)
Table of Contents
Advertisement
Page 270 of 466
Configuring the Terminal Server IP address
NN43041-310
Standard 01.11
Connecting an MRV LX8020S-102AC-R Terminal Server
System
Procedure 60
Configure IP address for the Terminal Server
Note: The IP address can be configured or changed only from the local
Management/ DIAG port.
1
Configure the Terminal Server's IP address:
InReach:0 >>config interface 1 address <ip address>
2
Configure the Terminal Server's IP subnet mask:
InReach:0 >>config interface 1 mask <subnet mask>
3
Configure the Terminal Server's IP primary gateway address:
InReach:0 >>config gateway <gateway ip address>
4
Save the configuration and check it:
InReach:0 >>save config flash
InReach:0 >>show system chara
InReach:0 >>show interface1 chara
Example commands:
InReach:0 >>config interface 1 address 47.11.244.101
InReach:0 >>config interface 1 mask 255.255.255.0
InReach:0 >>config gateway 47.11.244.101
October 2008
End of Procedure
End of Procedure
Advertisement
Chapters
Table of Contents
