Splitting The Call Servers - Avaya CS 1000E Upgrade Procedures

Upgrading a Call Server from CP PII to CP PIV
Procedure 13

Splitting the Call Servers

1 In Call Server 0,enter the SPLIT command from LD 135.
LD 135
SPLIT
****
Removing Call Server 1 CP PII card and Drive Carrier Card
Procedure 14
Removing the Call Server 1 CP PII Processor and Drive Carrier Card
1 Disconnect and label the LAN1 and LAN 2 cables from the Call Server 1
CP PII card faceplate. See Figure 27 on
2 Disconnect and label the COM 1 and COM 2 cables from the
Call Server 1 CP PII card faceplate. See Figure 27 on
3 Unscrew and unlatch the Call Server 1 CP PII card. See Figure 27 on
page
4 Remove the Call Server 1 CP PII card from its slot.
Avaya Communication Server 1000E Upgrade
Load program
Split the Call Servers
Exit program
The system is now in split mode, with call processing on
Call Server 0.
End of Procedure
125.
Page 123 of 226
page 125.
page 125.
Hardware Upgrade Procedures