Figure 8
MG 1010 chassis system overview
Avaya Communication Server 1000E Upgrade
•
An MG 1010 with greater than five but less than 12 Server cards requires
a blank card assembly kit (NTC350AAE6) for EMC containment. Five
blank cards are included in the blank card assembly kit.
•
If utilizing the Campus Redundancy High Availability (HA) Call Server
option, place the two CP PM Call Servers in separate chassis' to allow
for increased survivability. HA is not supported on a Co-resident Call
Server and Signaling Server system.
Figure 8 shows an example of a SA Media Gateway 1010 chassis system with
an MGC in slot 0, a CP PM Call Server, and a CP PM Signaling Server in the
main chassis.
You must activate the High Speed Pipe package 410 to install any redundancy
options. For more information, see "Appendix A: Upgrading to High
Availability" on
page
Upgrading Small System hardware
201.)
Page 77 of 226
Hardware Upgrade Procedures