Avaya CS 1000E Upgrade Procedures page 176

Page 176 of 226
Table 20
Readiness checklist (Part 2 of 2)
Have you:
Obtained the following:
• screwdrivers
• an ECOS 1023 POW-R-MATE or similar type of multimeter
• appropriate cable terminating tools
• shielded CAT5 or better Ethernet cables
• a computer (maintenance terminal) to connect directly to the Signaling Server, with:
— teletype terminal (ANSI-W emulation, serial port, 9600 bps)
— a Web browser for Element Manager (configure cache settings to check for new
Web pages
— every time the browser is invoked, and to empty the cache when the browser is
closed)
Prepared the network data as suggested in Converging the Data Network with VoIP
(NN43001-260) or Communication Server 1000E Planning and Engineering
(NN43041-220), as appropriate for your CS 1000 system?
Read all safety instructions in Communication Server 1000E Planning and Engineering
(NN43041-220), as appropriate for your CS 1000 system?
NN43041-464 Standard 05.04
Installing a Signaling Server
December 2011