Cp Pm Or Cp Dc Card Cabling - Avaya CS 1000E Upgrade Procedures

Figure 18
MGC faceplate
Figure 19
Breakout adaptor

CP PM or CP DC card cabling

Avaya Communication Server 1000E Upgrade
In a MG 1000E or a MG 1010 with a Server card in slots 1-10, the SDI port
of the CP PM or CP DC card routes through the backplane to the 50-pin
Amphinol connector on the back of the Media Gateway. An NTAK19EC
cable is required to adapt the 50-pin Amphinol connector to two 25-pin DB
Upgrading Small System hardware Page 101 of 226
Hardware Upgrade Procedures