Installing The Cp Mg Card - Avaya CS 1000E Upgrade Procedures

Page 96 of 226 Upgrading Small System hardware
Figure 14
2-port SDI cable (NTAK19EC) cable
NN43041-464 Standard 05.04
Perform the following procedure to install and cable the CP MG card as a
Server. An NTC325AAE6 serial port adapter kit is required.
Procedure 9

Installing the CP MG card

1 Ensure that the security dongle is inserted on the CP MG card.
2 Insert and slide the CP MG card into slot 0 of a Media Gateway cabinet or
chassis.
3 Lock the card in place with the faceplate latches.
December 2011
End of Procedure