Preparing For The Upgrade - Avaya CS 1000E Upgrade Procedures

Page 130 of 226

Preparing for the upgrade

NN43041-464 Standard 05.04
Upgrading a CP PII or CP PIV to CP PM
• "Installing a DSP Daughterboard onto an MGC card" on page 151
• "Installing the MGC card" on page 153
• "Installing the CP PM card" on page 162
• "Cabling the MGC" on page 165
• "Cabling the CP PM card" on page 168
This chapter implements a "source- to-target" approach to performing an
upgrade. It is important to correctly identify the source platform, target
platform, and maintenance window required to perform the upgrade.
This upgrade requires that the PC you are working from is
equipped with a CF reader (or, if a CF reader is not
available, a PCMCIA CF adaptor).
This chapter features check boxes indicating what condition the system
should be in at that stage of the upgrade. If the system is not in the proper
condition steps should be taken to correct this.
This section is written to maintain Dial Tone where possible and limit service
interruptions.
Before attempting any software or hardware upgrade field personnel should
follow the steps in Table 16 below:
Table 16
Prepare for upgrade steps (Part 1 of 2)
Procedure Step
Planning
Upgrade Checklists
Preparing
December 2011
IMPORTANT!
Page
131
132
132