Avaya CS 1000E Upgrade Procedures page 180

Page 180 of 226
Table 21
Connections checklist
Have you:
Obtained a serial cable (DTE-DTE null modem cable) to connect the server to a
maintenance terminal? The IBM x3350 requires a NTRX26NPE6 9 pin femail to 9 pin
female null modem cable.
Obtained the NTAK19EC cable (required for MG 1000E and MG 1010 with Server cards
in slots 1-10). This cable adapts the 50-pin MDF connector on the back of the MG
1000E, Universal Equipment Module, or 11C cabinet to a 25-pin DB connector. A DB-25
female to DB-25 female gender changer is required.
Obtained theNTC325AAE6 serial port adapter kit (required for MG 1010 and CP MG).
This cable kit adapts customer supplied shielded CAT5 Ethernet cables for serial
connections.
Obtained the CAT5 cables (or better) to connect the server to the ELAN and TLAN
subnets?
NN43041-464 Standard 05.04
Installing a Signaling Server
Before you connect a Signaling Server, ensure that you have the following
materials on hand.
December 2011