Avaya CS 1000E Upgrade Procedures page 63

8 Archive the system database on the Call Server and save it to a
removable media device (RMD). Label the database backup as the final
data from the current software.
LD 43
BKO
9 Remove all obsolete data configurations from the system.
For example, remove Meridian Mail agents, queues, and supporting
network loops. Remove all EPE, RPE, TDS, MFS and conference loops
(excluding XCT and IP devices).
10 Perform a data dump, see step 7.
11 Archive the system database on the Call Server and save it to an RMD,
see step 8. Label the database backup as the data to be upgraded.
12 Upgrade the hardware on the system. Use the data to be upgraded
backup when installing software onto the upgraded hardware.
13 Once the upgrade is complete and the system is stable, perform a data
dump, see step 7.
14 Cold start the system (sysload) to verify that the system can reload
sucessfully with the upgraded database.
Note: System error messages are printed during sysload if the database
contains obsolete data. Perform EDD CLR to save the database.
Avaya Communication Server 1000E Upgrade
Review prerequisites checklist
Load program
Copy data from primary to backup RMD
End of Procedure
Page 63 of 226
Hardware Upgrade Procedures