Avaya CS 1000E Upgrade Procedures page 139

6 The message "Backup process to local Removable Media Device ended
successfully" appears. Remove and label the floppy disk or CF card.
Note: Before attempting any upgrade, the loop, shelf, and side must be
verified.
Once you have completed the backup and archive of the Call Server customer
database, shut down the system and remove the backup media. You are now
ready to install the hardware.
Transferring the CP PII database from floppy disk to CF card
You must convert the CP PII floppy disk backup to a CF card. The CP PM
card requires a CF card with backup data for restoration. To transfer using the
customer database media converter tool, see Procedure 18 on
Transferring the database from floppy disk to CF card
(customer database media converter tool)
The floppy disk that contains the backed up customer database needs to be
transferred to a Compact Flash (CF) card. Avaya recommends you use the
extra CF card included with the Software Install Kit.
Avaya Communication Server 1000E Upgrade
Upgrading a CP PII or CP PIV to CP PM
Database backup information should be preserved for a
minimum of 5 days.
End of Procedure
This upgrade requires that the PC you are working from is
equipped with a floppy disk drive and CF reader (or, if a
CF reader is not available, a PCMCIA CF adaptor).
IMPORTANT!
IMPORTANT!
Hardware Upgrade Procedures
Page 139 of 226
page 140.