Avaya CS 1000E Upgrade Procedures page 59

Table 10
Upgrade readiness checklist (Part 2 of 4)
Action
Cables:
• CAT5 cables (for ELAN and TLAN connections)
• NTAK19EC 2-port SDI cable for MG 1000E, and Server cards
in slots 1-10 of a MG 1010.
• Customer supplied straight through DB25 to DB25 female
adapter to connect the NTAK19EC cable to a PC.
• NTBK48AA 3-port SDI cable for Gateway Controllers
• NTC325AAE6 serial port adapter kit.
• Customer supplied DB-9 or DB-25 serial cable to connect a PC
to a NTC325AAE6 serial port adapter.
• Customer supplied straight through shielded CAT5 Ethernet
cable to connect a NTC325AAE6 serial port adapter.
Note: To connect a terminal to the Server card with a NTAK19EC
cable, complete the following steps:
• Connect the NTAK19EC cable to the 50 pin MDF connector on
the back of the desired shelf of the Media Gateway.
• Connect a 25 pin to 9 pin straight through serial cable to the 25
pin DB connector at the end of the NTAK19EC cable (a female
to female gender changer may be required). These are
customer provided.
• Connect the other end of the 25 pin to 9 pin straight through
serial cable to the serial port on the maintenance terminal.
These are customer provided.
Avaya Communication Server 1000E Upgrade
Review prerequisites checklist
Hardware Upgrade Procedures
Page 59 of 226