Avaya CS 1000E Upgrade Procedures page 160

Page 160 of 226
NN43041-464 Standard 05.04
Upgrading a CP PII or CP PIV to CP PM
Engcode:NTDW60BA REL 08
ELAN mac address is:00:13:65:ff:ee:ed
TLAN mac address is:00:13:65:ff:ee:ec
RESET reason: Hard Reset.
Daughter board 1:NTDW62AA R02
Daughter board 2:NOT INS
Copyright 1984-2005
CPU: Chagall
Version: VxWorks5.5.1
Bootcode version: MGCBAA20
auto-booting...
Loading MSP from CF...1375736
Booting ARM0 (MSP) at 0x00000100 ...
Loading CSP from CF...6643712 + 5849088
Booting ARM1 (CSP) at 0x80010000 ...
Found device : INTEL 82365SL
Loading symbol table from /p/mainos.sym ...done
Loadware upgrade
If the MGC loadware is out of date (compared to the loadware on the Call
Server), an upgrade of the loadware occurs based on the Centralized Upgrade
setting defined during the software install and the values set in LD 143. The
default values are set so that the upgrade starts automatically once registration
is achieved with the Call Server.
There are six pieces of loadware that are updated on the MGC. These updates
are downloaded from the Call Server.
-> Received an upgrade request. Preparing MGC for upgrade.
Auto commit option has been enabled.
Upgrade of CSP loadware initiated.
OMM: IP link is UP between Primary Call Server and MGC 1
Upgrade of MSP loadware initiated.
Upgrade of APP loadware initiated.
December 2011
00:13:65:ff:f8:fd.
VxWorks System Boot
Wind River Systems, Inc.