Avaya CS 1000E Upgrade Procedures page 30

Page 30 of 226 Overview
NN43041-464 Standard 05.04
EM reduces configuration errors by providing a full text description of each
parameter and acronym. EM also reduces errors by simplifying parameter
value selection by using preselected default values and lists.
The following management tasks can be performed using Element Manager:
• System Status
Enables users to perform maintenance actions on Call Server
components (D-channel, MSDL, TMDI, Digital Trunk, Clock
Controller, Network and Peripheral, Trunk diagnostic) and
IP Telephony.
• Configuration
Enables users to configure customer data, trunks and routes (traditionally
done in LD 14, 15, and 16), D-channel and Common Equipment data
(LD 17), digital trunk interface (LD 73), Flexible Code Restriction and
Incoming Digit conversion (LD 49), and the IP telephony node.
• Network Numbering Plan
Enables users to configure the Network Routing Service, and ESN data
blocks for the Call Server (LD 86, 87, and 90).
• Software Upgrade
Enables users to obtain Call Server software version, License
parameters, and packages list. Users can also upgrade Voice Gateway
Media Card loadware and IP Phone firmware.
• Patching
Enables users to download, activate, and deactiveate patches for the Call
Server and Voice Gateway Media Cards. CS 1000 Release 7.5 Linux
based components use Avaya UCM centralized patching.
• System Utilities
Enables users to backup and restore databases, set time and date, and
upload software files and patches to a directory on the Signaling Server.
Configuration procedures for these tasks are in Avaya Communication
Server 1000E Installation and Commissioning (NN43041-310), System
Management (NN43001-600), and Element Manager System Reference -
Administration (NN43001-632).
December 2011