Avaya CS 1000E Upgrade Procedures page 82

Page 82 of 226 Upgrading Small System hardware
Installing a DSP Daughterboard onto an MGC card
Table 11
DSP Daughterboard configurations
Position 1 (DB1)
DB-32 (card slot 11)
None
DB-32 (card slot 11)
DB-96 (card slot 11, 12, and 13)
DB-96 (card slot 11, 12, and 13)
DB-128 (card slot 11, 12, 13 and 14)
Note: Only the PRI - Media Gateway MGC can house two DB-96 or DB-128 DSP daughter
boards.
NN43041-464 Standard 05.04
3 Remove the SSC card from its slot.
The SSC card and dongle should be preserved for a
minimum of five days.
It is illegal to continue to run the system software on the
existing SSC card. Please DESTROY or RETURN the
SSC dongle to your local Avaya Repairs/Returns center
upon confirmation of a successful upgrade. No further
orders will be accepted for the serial number since it will
be decommissioned and tracked in Avaya's database.
Note: If the upgrade fails, you will not be able to revert
back to the old system without the SSC card and dongle.
Table 11 lists the configuration options for Position 1 and 2.
December 2011
IMPORTANT!
End of Procedure
Position 2 (DB2)
None
DB-32 (card slot 0)
DB-32 (card slot 0)
None
DB-32 (card slot 0)
DB-128 (card slot 0, 9, 10, 15)