Avaya CS 1000E Upgrade Procedures page 136

Page 136 of 226
Table 17
Print site data (Part 3 of 3)
Site data
DTI/PRI data block for all customers
Review the configured D-channel information
Print the configured host information
Superloops and XPEs
Note: Items marked with asterisks (*) are required printout for conversion. Other items are
recommended for a total system status.
Performing a template audit
NN43041-464 Standard 05.04
Upgrading a CP PII or CP PIV to CP PM
A template audit (LD 01) reviews the templates in your system. Corrupted
and duplicate templates are cleaned up. An example of the information
generated during the audit is listed below.
December 2011
Print command
LD 73
REQ
TYPE
LD 96
LD 117
LD 97
REQ
TYPE
SUPL
PRT
DDB
STAT DCH
PRT HOST (provides
system IP addresses)
CHG
SUPL
Vxxx
V stands for a virtual
superloop and xxx is
the number of the
virtual superloop.
xxx = 0-252 in
multiples of four for
MG 1000E
xxx = 96-112 in
multiples of four for
MG 1000T (See Table
29)