Procedure 20
Installing a DSP Daughterboard
1
Place the MGC on a safe ESD surface.
2
Place the DSP DB in either DB position 1, position 2, or both depending
on how the DB is configured from a TN perspective.
3
Ensure the DSP DB is securely attached to the MGC. (using supplied
screws).
Installing the MGC card
Reuse the existing 3-port SDI cable (NTBK48) for installation of a MGC in
a MG 1000E chassis. Connect it to the COM RS232 port on the chassis.
Figure 37 on
Figure 37
NTBK48 connectors
Avaya Communication Server 1000E Upgrade
Upgrading a CP PII or CP PIV to CP PM
End of Procedure
page 153
illustrates the two connectors.
Page 153 of 226
Hardware Upgrade Procedures