Avaya CS 1000E Upgrade Procedures page 146

Page 146 of 226
NN43041-464 Standard 05.04
Upgrading a CP PII or CP PIV to CP PM
Media Gateway 1000E
The following rules apply to the placement of the CP PM cards in a Media
Gateway 1000E:
• The CP PM Call Server cannot be placed in slot 0 of any Media Gateway.
Slot 0 is reserved for the Gateway Controller.
• To allow for ease of cabling, the CP PM call server may be placed in slots
1 through 4 of the MG 1000E chassis, with the exception of the Option
11C Mini. The Option 11C Mini cannot have a CP PM card installed in
slot 4 as this slot was originally allocated for the 48 port DLC only.
• The CP PM Signaling Server may be placed in slots 1 through 4 (see
Figure 34 on page
• If utilizing the Campus Redundancy High Availability Call Server
option, place the two CP PM call servers in separate Chassis' to allow for
increased survivability.
Once the upgrade is complete, a typical SA MG 1000E chassis system will
resemble Figure 34 on
server and signaling server in the main chassis. The additional Media
Gateways contain Gateway Controller cards only for an SA configuration.
December 2011
147) or in another chassis if necessary.
page 147 with an MGC in slot 0, and a CP PM call