Avaya CS 1000E Upgrade Procedures page 161

Upgrading a CP PII or CP PIV to CP PM
Upgrade of FPGA loadware initiated.
Upgrade of DBL1 initiated.
-> 0x86f8bc30 (tMGCInst):
Upgrading FPGA Loadware...
logTask: 1 log messages lost.
0x86f8bc30 (tMGCInst): Programming FPGA ...
0x86f8bc30 (tMGCInst): FPGA Upgrade completed.
0x86f8bc30 (tMGCInst): Upgrading Application Loadware ...
0x86f8bc30 (tMGCInst): Gold CSP image upgraded
0x86f8bc30 (tMGCInst): mgcBootLineFix:fixing the bootline
0x86f8bc30 (tMGCInst): Upgrade Application Loadware
completed
0x86f8bc30 (tMGCInst): Rebooting MGC to take the upgrade
in effect.
Each Media Gateway IP address must be configured in overlay 97. For more
information, see Avaya Communication Server 1000E Upgrade Procedures
(NN43041-458)
Avaya Communication Server 1000E Upgrade
At this point configured Media Gateways synchronize with
the Call Server.
End of Procedure
Page 161 of 226
Hardware Upgrade Procedures