Avaya CS 1000E Upgrade Procedures page 138

Page 138 of 226
Backing up the CP PII or CP PIV customer database
NN43041-464 Standard 05.04
Upgrading a CP PII or CP PIV to CP PM
To back up call server data, perform a data dump to backup the customer
database to floppy on CP PII or Compact Flash (CF) on CP PIV.
Procedure 17
Performing a data dump to backup the customer database:
1 Log into the system.
2 Insert the appropriate backup media. Perform a for CP PII. Perform b for
CP PIV.
a. Insert a floppy disk into the active Core/Net floppy drive to back up
the database.
b. Insert a CF card into the active Core/Net RMD slot to back up the
database.
3 Load the Equipment Data Dump Program (LD 43). At the prompt, enter:
LD 43
4 When "EDD000" appears on the terminal, enter:
EDD
CAUTION
Loss of Data
If the data dump is not successful, do not continue;
contact your technical support organization. A data
dump problem must be corrected before proceeding.
5 The messages "DATADUMP COMPLETE" and "DATABASE BACKUP
COMPLETE" will appear once the data dump is complete.
****
December 2011
Load program
Begin the data dump
Exit program