Avaya CS 1000E Upgrade Procedures page 90

Page 90 of 226 Upgrading Small System hardware
NN43041-464 Standard 05.04
3 Enter port and security parameters, if required:
Note: This step is only necessary if you are using advanced security
features.
Change MGC advanced parameters? (y/[n]) : y
TLAN is set to auto negotiate, change? (y/[n]) : y
Note: Turning off auto negotiate on the TLAN
: will default it to 100Mbps full duplex.
Set TLAN to auto negotiate? ([y]/n) : y
ELAN is set to auto negotiate, change? (y/[n]) : y
Note: Turning off auto negotiate on the ELAN
: will default it to 100Mbps full duplex.
Set ELAN to auto negotiate? ([y]/n) : y
ELAN security Disabled, change? (y/[n]) : y
Enable ELAN security ? (y/[n]) : y
Enter security level OPTI, FUNC or FULL : opti
Avaya recommends that you disable ELAN security
during system installation.
Note: Spaces ~ * ` @ [ ] and # are not supported in
passwords.
Please input PSK(16-32 chars): (input is not echoed)
Strength of PSK: Weak
Please reenter PSK(16-32 chars): (input is not echoed)
4 Review the network information and enter "y" to confirm (see Figure 13 on
page 91).
December 2011
IMPORTANT!