Installing The Servers; Attaching The Front Bezel (S3400-H) - Avaya S3210R Manual

Getting Started
Home > Installation > Installing the system hardware

Installing the servers

This topic describes each of the servers supported for Message Networking and how to install them.
Attaching the front bezel
!
Installing the server in a rack-mount or stackable setup
!
Connecting the power cables
!
Connecting the port boards
!
Connecting the monitor, keyboard, and mouse
!
Connecting the Message Networking server to the LAN
!
Connecting the modem
!
Connecting the RMB
!
See Identifying the server and components
After you install the server, continue with
Top of page
Getting Started
Home > Installation > Installing the system hardware
Attaching the S3400-H front bezel
The front bezel must be attached to the S3400-H:
1. Insert the bottom of the front bezel into the chassis. See
2. Push the bezel upright until the two upper tabs snap into place under the top cover.
Top of page
Message Networking Help
Admin
> Installing the servers
(S3400-H)
(S3210 and S3210R)
(S3400-H)
to determine the server type you are installing.
Powering up the
Message Networking Help
Admin
>
Maintenance
system.
Maintenance
Installing the servers > Attaching the S3400-H front bezel
S3400-H front bezel
Home | Search
Print | Back | Fwd | Close
Reference
Home | Search
Print | Back | Fwd | Close
Reference
for a graphical depiction.
30