45 19 Removing And Installing Release Bearing (Clutch Removed) - Porsche 996 TT Repair Manual

30 45 19 Removing and installing release bearing
(clutch removed)
Removing release bearing
Installing release bearing
No. Designation Qty.
1 Snap ring 1
2 Thrust plate 1
3 1

30 45 19 Removing and installing release bearing (clutch removed)

Removal
Remove using pointed−nose pliers,
simultaneously push down pressure plate
using a press.
Check, do not wash out, just dry wipe
Installation
Ensure correct seating
Engage lug (twist lock) in the
opening of a diaphragm spring
tongue
Do not grease sliding surface
679