Porsche 996 TT Repair Manual page 484

• Check that the piston pin circlips are seated correctly!
14. Mount the piston pin and the piston pin circlip of the outer pistons from the inside (through the central
cylinder opening).
15. After fitting the piston pin circlip, push the cylinder up to the spacers 9651. Secure the cylinder with the
special tool, holder P 140.
16. Prepare central bushing. Fit new O−ring and grease liberally.
17. Position the bushing on the studs.
18. Fit pushing device 9660 on stud. Lay a plastic washer on the bushing and press the bushing into place on
the piston by turning the handwheel.
Installing pistons and cylinders
einordnung
421