3. Then pull out the assembly mandrel and press the connecting piece of the pressure hose into the plug−in
coupling.
Note
•
If the pressure hose has been replaced, use a new holder and a new plug−in coupling!
•
Instructions for the plug−in coupling are enclosed in the packaging!
4. Clip pressure hose back into the plastic
holder.
5. Bleeding clutch operation => Bleeding clutch operation.
6. Clean residual Pentosin off the vehicle using suitable means (e.g. water).
996420, 996421, 996450, 996451, 996620, 996621, 996650, 996651
Installing clutch pressure hose
einordnung
670