Porsche 996 TT Repair Manual page 663

26. Unscrew three M8 screws and one M6 screw between the hydraulic pump and the console. Pull the
expansion tank with hydraulic pump out of the bracket and suspend on the side.
27. Detach the air conditioning compressor and remove the bracket. To do this, disconnect the
electrical plug connection, remove the compressor and set it down with the hoses connected.
28. Disconnect the fuel lines on the fuel cooler. Make sure to counter with a wrench when doing this.
29. Loosen hose clamps on the intake distributor and pivot the throttle body upward. Undo the fastening
screws and remove the throttle body.
30. Unscrew closure cap of coolant expansion tank. Undo coolant drain plugs on right and left and drain
the coolant.
31. Equip drain plugs with new sealing rings.
Tightening torque: 10 to 15 Nm (7.5 to 11.0 ftlb.).
Removal
einordnung
600