Installing Turbocharger - Porsche 996 TT Repair Manual

10. Undo pressure pipe from turbocharger. Undo the hose clamp and remove the pressure hose from
the exhaust turbocharger for this purpose.
11. Unscrew the four fastening nuts on the turbocharger flange to the catalytic converter.
12. Unscrew exhaust manifold. Unscrew the nine fastening screws for this purpose. Remove turbocharger
with exhaust manifold.
13. Open separation point between turbocharger and exhaust manifold.
top of page

Installing turbocharger

1. Fit turbocharger. Insert a new seal between the turbocharger and the exhaust manifold and tighten
the three fastening screws to 30 Nm (22 ftlb.).
Installing turbocharger
einordnung
579