5. Mount engine holder with adapter half. Screw engine holder with screwed in adapter half onto the
crankcase half of the cylinder bank 4 − 6.
6. Mount the second adapter half on crankcase. Screw the screw sleeves onto the studs and tighten by hand.
Screw in connecting screws of the adapter half and tighten with 10 Nm (7.5 ftlb.). Subsequently tighten
the assembly sleeves.
top of page
Left crankcase half (cylinder bank 1
Left crankcase half (cylinder bank 1
einordnung
3)
3)
392