18. Push the right and left pressure hoses into the pressure pipe, until they audibly engage.
19. Make sure that the pressure hoses have been fitted correctly, by tipping and pulling on the pressure hoses.
20. Install air cleaner housing.
21. Fasten hot film mass air flow meter line:
•
Open omega clip on the left−hand side of the air cleaner housing,
•
Insert electrical line of the hot film mass air flow meter,
Close omega clip.
•
22. Connect battery.
23. Enter radio code.
Note
•
The cooling system is bled in connection with the Porsche System Tester 2.
•
Select special functions. Menu point.
24. Bleed the cooling system => Draining and filling in coolant.
996420, 996421, 996450, 996451, 996620, 996621, 996650, 996651, 996840, 996841
Installation
einordnung
537