Porsche 996 TT Repair Manual page 677

3. Unscrew the fastening screw M6 x 34 at the rear of the air cleaner housing.
4. Undo hose clamp. Undo the hose clamp −arrow− between the air cleaner housing and the intake pipe.
5. Tilt air cleaner housing outwards. To do this, tilt the housing upwards and to the right by 90° and then turn
the housing to the left by approx. 90°.
6. Unclip the hot film mass air flow meter cable. Open the omega clip on the left side of the air cleaner
housing and take out the cable. Take the air cleaner housing out of the engine compartment.
7. Open air cleaner housing. To do this, open the new captive screws and pull the two housing halves
apart.
8. Take out the cleaner element. Take out the air cleaner element. Wipe out the two housing halves with a
cloth.
top of page
Removing air cleaner
einordnung
614