Checking The Thickness Of The Disc Brake Pads − Turbo And Gt2 - Porsche 996 TT Repair Manual

46 Checking the thickness of the disc brake pads −
Turbo and GT2
Caution
WARNING
Braking effect impaired if the brake pads are exchanged too late!
Braking effect impaired if the brake discs are exchanged too late!
Danger of injury and damage to vehicle if braking effect is impaired!
• The brake pads must be replaced when the brake pad warning indicator lights up, but no later than
when there is a residual pad thickness of 2 mm!
Note
• If brake pad wear is indicated by the warning light, the warning contact (sender including wire and
plug connection) must also be replaced!
• Replacing the warning contact can be avoided by replacing the brake pads no later than when the pad
thickness is 2.5 mm −arrows− !
• Warning contacts must be replaced if the core of the wire is worn!
• However, if only the plastic part of the warning contact is worn, there is no need to replace it!
CAUTION
Vehicles with PCCB (Porsche Ceramic Composite Brake): Danger of material damage during wheel
removal/installation (danger of damage to brake discs)!
• Use assembly aids (assembly pins) in order to exclude any possibility of heavy contact of the wheel
with the brake disc! The assembly aids (2 assembly pins) are located in the luggage compartment!
46 Checking the thickness of the disc brake pads − Turbo and GT2 298