Porsche 996 TT Repair Manual page 637

Open hose clamp at bottom of charge air cooler and pull off the flange.
3. Remove charge air cooler. To do this, disconnect both hose connections on the charge air cooler.
Then unscrew the seven fastening screws on the charge air cooler (two at rear)
two at heat shield
and three in wheel housing. Remove charge air cooler.
4. Unscrew cover panel.
5. Unclip intake pipe. Unclip the pipe at the bottom and lift out.
6. Unscrew the four fastening nuts.
7. Pull air guide at the back end downwards and then take out of the body towards the rear.
top of page
Removing air guide for charge air cooling
einordnung
574