After loosening the lock nut, turn eccentric −A−
appropriately.
top of page
Front axle
Adjusting camber
WARNING
Danger of injury and damage to property due to malfunctions in the PSM control range if the steering angle
sensor is not calibrated or is calibrated incorrectly!
•
Calibrate steering angle sensor with wheels in straight−ahead position with the Porsche System Tester
2!
•
The steering angle sensor actual value must be checked after a suspension alignment which resulted in
no changes being made to the wheel alignment values!
The camber is adjusted by moving the spring strut transversely.
For this purpose, loosen the −three outer fastening nuts− on the spring−strut mount and, to move
the spring strut, remove the covering cap on the piston rod.
Adjusting caster
The caster is not adjustable.
Adjusting toe
einordnung
271