3. Tilt the air cleaner housing upwards to the right by 90° and then turn the air cleaner housing and remove
from the engine compartment.
4. Unscrew the hose clamp (a/f 7) between the air cleaner housing and the
cowl.
Note
In order to avoid any damage when removing the intake pipes, pull off the connector.
•
5. Pull off the electrical connector on the solenoid hydraulic valve of the cylinder bank
1−3.
6. Undo pressure pipe −middle− by removing the spring clip −5− , hose clamp −3− , hexagon−head bolts −1
& 2− and electrical plug −4− .
7. Pull off vacuum hose to the control valve.
8. Unscrew fuel return line −1− and fuel supply line −2− . It is important to counter when performing this
step.
9. Remove fuel filter.
Removal
einordnung
524