Porsche 996 TT Repair Manual page 629

12. Push the new fuel filter into the restraining strap and tighten again. Position the filter in such a way
that the mark −arrows− on the filter is aligned with the outer edge of the holder in installation
position.
13. Position the fuel filter with holder on the coolant expansion tank again and press it down at rear. The
holder must engage audibly.
14. Connect plug connector of the fuel supply line. The plug must engage audibly. Pull slightly to
ensure that the connection is properly locked.
15. Tighten fuel pressure line. Make sure to counter with a wrench when doing this.
16. Connect the ground cable to the filter.
17.
Removing fuel filter
einordnung
566