Porsche 996 TT Repair Manual page 412

1. Tension the coil spring with the spring clamp until the piston rod is
relieved.
2. To undo the connection (piston rod to spring strut mount) counter at the piston rod with a 7mm
open−ended wrench.
3. Remove all parts from the piston rod.
4. Replace nut for fastening the piston rod on the spring strut mount.
Preliminary work and notes on assembly:
The following spring plates (compensation parts) are available:
Allocation of the spring plate according to the coil spring tolerance group.
1 green line = 4.0 mm thick compensation part (coloured black)
1 white line = 0.5 mm thick compensation part (natural colour)
5. Press intermediate part (compensation part −4− ) into the spring plate −5− in the correct position (not
twisted) and complete with the mount −3− . Observe following note!
Note
• In the correct position means: None of the 7 cutouts −A− must be free on the spring plate −5− !
Disassembly
einordnung
349