Installing air cleaner
1. Insert filter element. Insert the filter element into the cleaned air cleaner housing. Retighten the two
air cleaner housing halves with the new captive screws.
2. Clip in hot film mass air flow sensor cable. To do this, insert the cable into the omega clip on the left air
cleaner housing side and then close the clip.
3. Place the air cleaner housing in the engine compartment as shown and move into installation
position. To do this, first turn the housing to the right by approx. 90° and push the rubber hose over
the flange. Then swivel downwards by 90°.
Installing air cleaner
einordnung
615